Once upon a time, Paul Civati <[EMAIL PROTECTED]> said: > Personally, I have for the most part (various equipment) found that > auto-neg works fine although I know that a lot of people will say to > nail both ends to 100/full.
There are only a couple of things that I don't leave at autoneg: - Cisco 2924 switches when connected to another Cisco 2924 switch (they tend to jump between half and full duplex but not at the same time) - the CPE BellSouth (the New AT&T) uses for MetroE advertises 100/half but gets errors; forcing my switch or router port to 100/full works with no errors - A couple of old AlphaServers that someone set the speed and duplex at the console firmware and I never remember to clear it when the system is down, and they don't autoneg correctly when it is set Everything else I leave at autoneg with no problems. -- Chris Adams <[EMAIL PROTECTED]> Systems and Network Administrator - HiWAAY Internet Services I don't speak for anybody but myself - that's enough trouble. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
