Hi, Last time I checked it, both Juniper and Cisco has false positive for very aggressive values (in production networks, where there are several other process competing in CPU usage and flap in some links).
I am wondering if enabling it on PFE, the possibility of getting recovery timer from 100 to 150ms would be possible without false positives. Tks, Alaerte > > > By default this runs on the RE .. so can be limited if you have many > sessions. > > However turning on this knob .... > > # show routing-options > ppm { > delegate-processing; > } > > ...will enable it on the PFE .. hence will scale much better. > This only works on the later Juniper models though. > > cheers > Sean > > > > > > Bit Gossip wrote: > > I read in a Juniper preso, that BFD can work at layer 2 on a ethernet > > link, but I can not find any reference in the Junos doc. Any idea if > > this is really supported and how to configure it? > > Thanks, > > Bit. > > > > _______________________________________________ > > juniper-nsp mailing list juniper-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp