Hi Folks, I want to load balance multiple GRE tunnels over a number of circuits between a couple of routers. Since the routers will load balance per-flow and not per-packet, will the routers be able to distinguish between the tunnels ?
The problem is that the tunnels will all be between the same IP addresses. AFAIK the layer3/4 info the router will use to load-balance is as follows: * Source IP address * Destination IP address * Protocol * Source port number * Destination port number * Incoming interface index Since all of these will be identical, what will happen? Thanks, Leigh Porter _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp