I need some Juniper-Foo for my OSPF config. I have 3 routers connected to a GigE switch.
Router A is a Cisco 12000 Router B is a Juniper J6350 Router C is a Redback SE-400 I have A&C talking OSPF and sharing routes just fine. I have A&B & C&B complaining about what the Juniper is sending out and shutting it down. Router B config is # show protocols ospf export export-statics; area 0.0.0.0 { authentication-type md5; interface ge-0/0/0.0 { authentication { md5 1 key "$XXXXXXXXXXXXXXXXX"; ## SECRET-DATA } } } Router A config is interface GigabitEthernet4/1 description Link to CORE-SW-A-Fe-0-1 ip address 1.2.3.4 255.255.255.128 no ip directed-broadcast ip ospf authentication message-digest ip ospf authentication-key 7 XXXXXXXXXXXXXXX ip ospf message-digest-key 1 md5 7 XXXXXXXXXXXXX no negotiation auto router ospf 1 router-id 204.97.12.4 log-adjacency-changes nsf area 0 authentication message-digest redistribute connected subnets redistribute static subnets network 1.2.3.0 0.0.0.255 area 0 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp