Hello, running a RE with only 512 MB with recent JunOS sounds dangerous to me. And with even less than that.... I wouldnt sleep well :) Have you tested that your config runs fine with 256MB in production? If it does it _might_ work. However...i strongly recommend you get additional ram. See: http://juniper.cluepon.net/index.php/Route_Engine_DRAM_Compatibility Its not really that expensive...
Regards, Jonas Frey On Mon, 2008-04-07 at 09:47, Junaid wrote: > Hi, > > I am using M10i router with 512 DRAM on master routing engine and 256 > on backup routing engine. Memory on both REs is below 100%. Can there > be any (routing/forwarding/other) issue that could be caused by > unequal DRAM on the two REs? > > > Regards, > > Junaid > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp