On Tue, 15 Apr 2008 15:38:08 -0700, Jonathan Crawford <[EMAIL PROTECTED]> wrote: Hi,
> It has this nice error in the config block when you add it... > [EMAIL PROTECTED]> show configuration routing-instances what about virtual-routers? IIRC the ERX considers Layer1-Layer2 to the "context" default and Layer-3 and above to the context/virtual-router where it was configured. #sh config virt-ro default interface giga 0/0 interface gigabitEthernet 0/0 mtu 2000 duplex full load-interval 30 encapsulation vlan interface gigabitEthernet 0/0.101 vlan id 101 interface gigabitEthernet 0/0.102 vlan id 102 #sh config virtual-ro test interface giga 0/0 interface gigabitEthernet 0/0.101 ip address 10.0.2.6 255.255.255.248 #sh config virtual-ro prov interface giga 0/0 interface gigabitEthernet 0/0.102 ip address 172.24.2.1 255.255.255.248 best regards, Olaf _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp