Well, I'm running 8.2.2 p04 and it seems to work fine for me... Please clarify what you mean by 'not working'
And to answer your second question, yes there is a way to delete entries in your classifier lists when in use; t-rex#sh classifier-list Classifier Control List Table ---------- ------- ---- ----- IP voice.2 ip any host xx.xx.xx.xx IP voice.5 ip host xx.xx.xx.xx any IP voice.7 udp any host xx.xx.xx.xx range 5060 5065 IP voice.8 udp any host xx.xx.xx.xx range 5060 5065 To delete an entry just go into config and type; No classifier-list voice x (where x is the number corresponding to the rule you want to nuke) Also - you may want to RTFM. Cheers, Callum Barr Network Engineer WorldxChange Communications -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of cscosunny Sent: Tuesday, 22 April 2008 6:15 p.m. To: Juniper-Nsp Subject: [j-nsp] (no subject) Hello I have two questions: In which software version of junose vlan classification and policy lists work? I tried with 8-2-2 (cant remember which patch version)and didn't work. And second is there a way to delete classifier list commands from policies being used? Thank you _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp