OK, the High Availability docs aren't terribly clear. Does anyone know if I can use NSR with both multicast and L3 VPNs?
8.4/8.5 HA doc simply says: Nonstop routing is supported for the following protocols: * Border Gateway Protocol (BGP) 9.0 says: Nonstop active routing is supported for aggregate and static routes and for the following protocols: * Border Gateway Protocol (BGP), except for BGP VPN services So apparently no L3 VPNs there. Were they present earlier, or just not caveated? Now, 9.1 says: Border Gateway Protocol (BGP), for unicast IPv4 and IPv6 address families only. If you configure any other address family, the BGP session will not come up on the backup router. which seems to say, relative to 9.0, that VRFs are OK but multicast is not. Except that the 9.1 Feature Guide indicates new support for *L2* VPNs but nothing about L3. Any on-the-ground experience would be appreciated :-) -dd _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp