I'm fiddling around with a J2300 with 2 2-port SHDSL on it. On the first atm interface, i got the following config :
at-0/0/2 { encapsulation atm-pvc; atm-options { vpi 0; } shdsl-options { line-rate auto; } unit 0 { encapsulation atm-ppp-vc-mux; vci 35; ppp-options { pap { default-password "xxxxx" local-name "xxxxxx"; local-password "xxxxxx" passive; } } family inet { unnumbered-address fe-0/0/1.0; } } This works flawlessly. I also have a seconds SHDSL interface at-0/0/3 which i want to bond with the first one. On Cisco's i used to do ppp-multilink to get this to work, but the J2300 complains about an ATM2-IQ interface which is needed. In the specsheet there's support for multilink and bonding, but i don't know how to configure it. Is there anyone who can tell me how to do load-balancing between the 2 SHDSL ports? Thanks! Remco _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp