Hi Lakshmi, I haven't as yet. I will try belling them now. Thanks, Lee From: Lakshminarayanan P [mailto:[EMAIL PROTECTED] Sent: 17 June 2008 14:09 To: Lee Hetherington Cc: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] Serial Question Hi Lee, This might be a known issue. Have you buzzed Juniper TAC about this? Cheers Lakshmi 2008/6/17 Lee Hetherington <[EMAIL PROTECTED]>: Hi All,
I have a J2320-JH which is replacing an aging Cisco 3640. I am having trouble bringing up an x.21 leased line. It brings up the line, but in cisco terms not the protocol. It keeps telling me on my subinterface "flags: down". Below are my cisco and juniper configs. Anyone any ideas, the isp is being particularly un-helpful. Cisco: ! interface Serial0/0 bandwidth 2048 no ip address encapsulation frame-relay no ip mroute-cache keepalive 5 no fair-queue frame-relay lmi-type ansi ! interface Serial0/0.16 point-to-point description Telstra Circuit ip address 154.32.xxx.81 255.255.255.252 <http://255.255.255.252/> no cdp enable frame-relay interface-dlci 16 IETF ! Juniper: se-1/0/1 { description Telstra; mtu 1500; encapsulation frame-relay; serial-options { clocking-mode loop; } unit 0 { description "Telstra Serial Circuit MXFS203988"; point-to-point; dlci 16; family inet { address 154.32.152.81/30; } } } Many Thanks, Lee _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp -- This message has been scanned for viruses and dangerous content by REDScanner, and is believed to be clean. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp