"With JUNOS Release 9.0 and later, the compact flash disk memory requirement for JUNOS software is 1 GB."[1]
-r [1] http://www.juniper.net/techpubs/software/junos/junos91/rn-sw-91/rn-sw-91.pdf On Wed, Jul 23, 2008 at 10:59:45AM -0700, Marlon Duksa wrote: > Hi - I'm trying to upgrade an older M20 from Jun8.4 to 9.1 and this is the > message I get. > What boot device is in question here? I'm doing the upgrade from the hard > disk and not the install media. Is there any way to see this boot device by > show cmd? > > Installing package '/var/tmp/jinstall-9.1R2.10-domestic-signed.tgz' ... > Verified jinstall-9.1R2.10-domestic.tgz signed by PackageProduction_9_1_0 > Adding jinstall... > > WARNING: This installation will not succeed. > WARNING: The boot device is less than 256M. > WARNING: A hardware upgrade is required. > > ERROR: jinstall fails requirements check > ERROR: jinstall-9.1R2.10-domestic-signed fails post-install > > [edit] > [EMAIL PROTECTED] run request system reboot > > Thanks, > Marlin > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp