Dear All, I have a problem in my E120 Router , where i have configured the RADIUS Server to send to the Users on the E120 thier IP Subnet so that the IP subnets of the users will be "Access-internal" routes as below
E120#sh ip route 10.10.10.10 Protocol/Route type codes: I1- ISIS level 1, I2- ISIS level2, I- route type intra, IA- route type inter, E- route type external, i- metric type internal, e- metric type external, P- periodic download, O- OSPF, E1- external type 1, E2- external type2, N1- NSSA external type1, N2- NSSA external type2 L- MPLS label, V- VRF, *- via indirect next-hop Prefix/Length Type Next Hop Dst/Met Interface ------------------ --------- --------------- ---------- ----------------------- 10.10.10.10/32 *AccIntern *0.0.0.0 2/0 GigabitEthernet3/0/0.505252.59 but by mistake someone configured the RADIUS to send the default route (0.0.0.0.0/0) for a specific user which affects the performance of the E120 router and modifyed the current default route learned by OSPF So the Question is Is it possible to restrict the routes the comes from the RADIUS Server and not accepting it all (e.g denying the default route from the radius) ? or Is it possible to modify the admin distance for the Access-internal routes so that it will be higher that the dynamic default route configured on the E120 router ? Appreciate your help Thanks In Advance Regards Amr _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp