Dear Masood , Thanks , but can this change be made from the E120 Side ?
Regards Amr On Mon, Aug 25, 2008 at 11:22 AM, Masood Ahmad Shah <[EMAIL PROTECTED]>wrote: > Yea you can set the route preferences ( In Cisco world administrative > distance ). For this you need to find the route preference radius attribute > ... here is the list of supported radius attributes... > > > > http://www.juniper.net/techpubs/software/erx/erx50x/swconfig-broadband/html/ > radius-attributes.html > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Amr > Sent: Monday, August 25, 2008 11:21 AM > To: juniper-nsp@puck.nether.net > Subject: [j-nsp] Restricting RADIUS Routes for E120 > > Dear All, > I have a problem in my E120 Router , where i have configured the > RADIUS Server to send to the Users on the E120 thier IP Subnet so that the > IP subnets of the users will be "Access-internal" routes as below > > E120#sh ip route 10.10.10.10 > Protocol/Route type codes: > I1- ISIS level 1, I2- ISIS level2, > I- route type intra, IA- route type inter, E- route type external, > i- metric type internal, e- metric type external, > P- periodic download, O- OSPF, E1- external type 1, E2- external type2, > N1- NSSA external type1, N2- NSSA external type2 > L- MPLS label, V- VRF, *- via indirect next-hop > Prefix/Length Type Next Hop Dst/Met > Interface > ------------------ --------- --------------- ---------- > ----------------------- > 10.10.10.10/32 *AccIntern *0.0.0.0 2/0 > GigabitEthernet3/0/0.505252.59 > > > but by mistake someone configured the RADIUS to send the default route > (0.0.0.0.0/0) for a specific user which affects the performance of the E120 > router and modifyed the current default route learned by OSPF > > So the Question is > Is it possible to restrict the routes the comes from the RADIUS Server and > not accepting it all (e.g denying the default route from the radius) ? > or > > Is it possible to modify the admin distance for the Access-internal routes > so that it will be higher that the dynamic default route configured on the > E120 router ? > > Appreciate your help > > Thanks In Advance > > Regards > Amr > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp