-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
You may also want to check out these:
http://forums.cacti.net/about12792.html
Works for the J-series I had it pointed at at one point.
David
On Sep 30, 2008, at 10:24 PM, Nitzan Tzelniker wrote:
Hi,
If you are tacking about http://forums.cacti.net/about11320.html
Try to remove these lines from the XML
- <jnxFruType>
- <name>FRU Type</name>
- <method>walk</method>
- <source>value</source>
- <direction>input</direction>
- <oid>.1.3.6.1.4.1.2636.3.1.15.1.6</oid>
- </jnxFruType>
It works for me on M10i and M120 and I don't see any reason it
wouldn't
work on other platforms
Nitzan
On Wed, Oct 1, 2008 at 05:23, Mark Tinka <[EMAIL PROTECTED]>
wrote:
Hi all.
Does anyone have a pointer for some good templates for Cacti
that would monitor vital information on routing engines and
(C)FEB's, i.e., CPU utilization, memory utilization, e.t.c.
Of particular interest, at this time, is for the M7i/M10i.
What we've been able to dig up in the wild are templates for
the M20 and M160, both of which seem broken enough not to
work or cause additional problems in Cacti.
All help appreciated.
Cheers,
Mark.
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (Darwin)
iEYEARECAAYFAkjk58MACgkQLa9jIE3ZamP7dQCeMswrAqnbQqpZJUB1QuNlhZQZ
jIYAoIY8D3JYmZuCFDZQhmLxaLPPlyJi
=tl5T
-----END PGP SIGNATURE-----
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
