Hi Guys, thanks for your help. I was informed by JTAC that this is a known issue. This issue matches a Juniper internal KA which basically states that this SRP in slot 6 (with the problem) will need to be RMA'd so that the processor can be upgraded. SRP's not affected will have a serial numbers of xx0219xxxx and later. This is only for SRPs 5G and 10G and the problem shows up from release 8-1-0. Best regards
Thiago Drechsel ________________________________ From: ext Diogo Montagner [mailto:[EMAIL PROTECTED] Sent: Saturday, October 18, 2008 3:42 PM To: Drechsel, Thiago (NSN - BR/Curitiba) Cc: juniper-nsp@puck.nether.net Subject: Re: [j-nsp] JUNOSe Upgrade error message Hi Thiago, probably you are running out of memory. Give a look on the SRP Module Memory Requirements section on the 8.2.2 release notes: http://www.juniper.net/techpubs/software/erx/junose82/sw-rn-erx822/html/ sw-rn-erx822-body2.html#964916 Regards, ./diogo -montagner On Sat, Oct 18, 2008 at 12:18 PM, Drechsel, Thiago (NSN - BR/Curitiba) <[EMAIL PROTECTED]> wrote: Hi all. Has anybody seen this message, when uploading JUNOSe? Loading local:/images/srp/srp47d78a49.exe...rsLoadModule(local:/images/srp/srp47 d78a49.exe): Release is too large for obsoleted CPU to load This was seen when upgrading a ERX_1410 from 7-2-3 to 8-2-2p0-7. Thanks for any comment. Thiago Drechsel _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp