I already advertise my entire /21 to eBGP transits. I am just trying to make the two router aware of which has a specific subnet.
Brendan Mannella President and CEO TeraSwitch Networks Inc. Ph: 412-387-3543 Mobile: 412-592-7848 Efax: 412-202-7094 ----- Original Message ----- From: "le van cuong" <[EMAIL PROTECTED]> To: "Brendan Mannella" <[EMAIL PROTECTED]> Cc: juniper-nsp@puck.nether.net Sent: Monday, November 24, 2008 8:57:08 PM GMT -05:00 US/Canada Eastern Subject: Re: [j-nsp] Redistribute Connected Hi Brendan, I think you need to create a policy with mach term direct and then export to IBGP and also EBGP if needed. BGP itself will not be redistributed other protocol to its neighbor. ex: policy-options { policy-statement dr-bgp { term 1 { from { protocol direct; route-filter x.x.x./y exact; } then accept; } } } Regards& Good Luck, Cuong, On Tue, Nov 25, 2008 at 8:25 AM, Brendan Mannella < [EMAIL PROTECTED] > wrote: Hello, I am working with two M7is running EBGP with a transit on each, and IBGP between the two routers. When i create a new sub interface with a ip and vlan on one router the route is not being advertised to the other router via IBGP. I assume i need some policy for that. Can anyone shed any light on how to do this? Thanks, Brendan _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp