For PPPoE I indeed do that. But it doesn't seem to be supported for DHCP. Bjørn Tore Paulen
> -----Opprinnelig melding----- > Fra: Bjørn Mork [mailto:bj...@mork.no] > Sendt: 13. januar 2009 14:44 > Til: Bjorn Tore Paulen > Kopi: 'Juniper-Nsp' > Emne: Re: [j-nsp] ERX DHCP MIB? > > Bjorn Tore Paulen <b...@paulen.net> writes: > > > RIPE is eager to know the number of IPs I use at a given > time. I can > > graph percent of pool (MRTG -> > juniDhcpLocalServerPoolUtilPct), but it > > seems that the OID I want isn't supported. Could this be a > version issue? I run 8.2.3. > > > > Regarding > http://www.oidview.com/mibs/4874/Juniper-DHCP-MIB.html the > > OID I'd want probably is > > juniDhcpLocalServerPoolInUse > (1.3.6.1.4.1.4874.2.2.22.1.3.3.1.1.19) > > How about using juniAddressPoolInUse from > http://www.oidview.com/mibs/4874/Juniper-ADDRESS-POOL-MIB.html > instead? > > we don't use dhcp local server, but I assume the results will > be the same as for ppp: > > bj...@server:~$ snmpwalk -v2c -c comm router > .1.3.6.1.4.1.4874.2.2.21.1.1.1.1 > Juniper-ADDRESS-POOL-MIB::juniAddressPoolRowStatus.1 = > INTEGER: active(1) > Juniper-ADDRESS-POOL-MIB::juniAddressPoolName.1 = STRING: "adsl" > Juniper-ADDRESS-POOL-MIB::juniAddressPoolStart.1 = IpAddress: 0.0.0.0 > Juniper-ADDRESS-POOL-MIB::juniAddressPoolEnd.1 = IpAddress: 0.0.0.0 > Juniper-ADDRESS-POOL-MIB::juniAddressPoolSize.1 = INTEGER: 3574 > Juniper-ADDRESS-POOL-MIB::juniAddressPoolInUse.1 = INTEGER: 2213 > Juniper-ADDRESS-POOL-MIB::juniAddressPoolHighUtilThreshold.1 > = INTEGER: 85 > Juniper-ADDRESS-POOL-MIB::juniAddressPoolAbatedUtilThreshold.1 > = INTEGER: 75 > Juniper-ADDRESS-POOL-MIB::juniAddressPoolUtilPct.1 = INTEGER: 61 > Juniper-ADDRESS-POOL-MIB::juniAddressPoolTrapEnable.1 = > INTEGER: false(2) > Juniper-ADDRESS-POOL-MIB::juniAddressPoolNextPoolProfileIndex. > 1 = INTEGER: 0 > > > Bjørn > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp