Hi Nilesh/Jeff My Cisco config
spanning-tree portfast bpdufilter default interface GigabitEthernet0/1 description To Juniper ge-0/0/0 PE-1GE-SX-B port-type nni switchport access vlan 2 no keepalive media-type sfp speed nonegotiate no cdp enable spanning-tree portfast end interface GigabitEthernet0/5 description To Juniper ge-1/3/0 inbuilt port-type nni switchport access vlan 3 media-type sfp speed nonegotiate no cdp enable no keepalive spanning-tree portfast end The Police discards counter now increases by 1 in every 30-40secs interval in ge-0/0/0 but I still see it. But I don't think i really need to worry much, do I? because I don't see any packet loss. Regards, Samit Nilesh Khambal wrote: > Please disable cdp and keepalives on Cisco port connected to this M7i. > Also, disable spanning tree on this port by configuring it as an access > port. > > Thanks, > Nilesh. > > Samit wrote: >> Hi, I just installed my first juniper M7i in the production couple of >> hour back and after resolving few routing issue so far it is running >> smoothly. I noticed that my PE-1GE-SX-B interface is showing only >> "Policed discards", the counter which increases by 1 in every 1-2 secs >> but the inbuilt GE is showing no errors. As I am not running any >> qos/policing in the interface I was wondering what does it means..and >> how to fix this error? the router's both interface is connected with a >> Cisco 3400ME in different Vlan. >> >> interfaces { >> ge-0/0/0 { >> description " Cisco3400-ME Gi0/1 Vlan2"; >> unit 0 { >> family inet { >> address 192.168.0.1/28; >> } >> } >> } >> >> Delay: 1/0/1 >> Interface: ge-0/0/0, Enabled, Link is Up >> Encapsulation: Ethernet, Speed: 1000mbps >> Traffic statistics: Current >> delta >> Input bytes: 3589144576 (34951312 bps) >> [26149611] >> Output bytes: 4117970233 (36219936 bps) >> [27659648] >> Input packets: 12654493 (15073 pps) >> [90668] >> Output packets: 13058310 (15834 pps) >> [94510] >> Error statistics: >> Input errors: >> 0 [0] >> Input drops: >> 0 [0] >> Input framing errors: >> 0 [0] >> Policed discards: >> 558 [4] >> L3 incompletes: >> 0 [0] >> L2 channel errors: >> 0 [0] >> L2 mismatch timeouts: >> 0 [0] >> Carrier transitions: 0 Output >> errors: [0] >> >> >> >> Regards, >> Samit >> >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp