Yes. That is correct. It is harmless at this rate and with this
config. If you are still concerned, you can enable port mirroring on
cisco port to find out what L2 or L3 packets are being sent out on
that port.
Thanks,
Nilesh
On Feb 9, 2009, at 10:08 PM, "Samit" <janasa...@wlink.com.np> wrote:
Hi Nilesh/Jeff
My Cisco config
spanning-tree portfast bpdufilter default
interface GigabitEthernet0/1
description To Juniper ge-0/0/0 PE-1GE-SX-B
port-type nni
switchport access vlan 2
no keepalive
media-type sfp
speed nonegotiate
no cdp enable
spanning-tree portfast
end
interface GigabitEthernet0/5
description To Juniper ge-1/3/0 inbuilt
port-type nni
switchport access vlan 3
media-type sfp
speed nonegotiate
no cdp enable
no keepalive
spanning-tree portfast
end
The Police discards counter now increases by 1 in every 30-40secs
interval in ge-0/0/0 but I still see it. But I don't think i really
need
to worry much, do I? because I don't see any packet loss.
Regards,
Samit
Nilesh Khambal wrote:
> Please disable cdp and keepalives on Cisco port connected to this
M7i.
> Also, disable spanning tree on this port by configuring it as an
access
> port.
>
> Thanks,
> Nilesh.
>
> Samit wrote:
>> Hi, I just installed my first juniper M7i in the production
couple of
>> hour back and after resolving few routing issue so far it is
running
>> smoothly. I noticed that my PE-1GE-SX-B interface is showing only
>> "Policed discards", the counter which increases by 1 in every 1-2
secs
>> but the inbuilt GE is showing no errors. As I am not running any
>> qos/policing in the interface I was wondering what does it
means..and
>> how to fix this error? the router's both interface is connected
with a
>> Cisco 3400ME in different Vlan.
>>
>> interfaces {
>> ge-0/0/0 {
>> description " Cisco3400-ME Gi0/1 Vlan2";
>> unit 0 {
>> family inet {
>> address 192.168.0.1/28;
>> }
>> }
>> }
>>
>> Delay:
1/0/1
>> Interface: ge-0/0/0, Enabled, Link is Up
>> Encapsulation: Ethernet, Speed: 1000mbps
>> Traffic statistics:
Current
>> delta
>> Input bytes: 3589144576 (34951312 bps)
>> [26149611]
>> Output bytes: 4117970233 (36219936 bps)
>> [27659648]
>> Input packets: 12654493 (15073 pps)
>> [90668]
>> Output packets: 13058310 (15834 pps)
>> [94510]
>> Error statistics:
>> Input errors:
>> 0 [0]
>> Input drops:
>> 0 [0]
>> Input framing errors:
>> 0 [0]
>> Policed discards:
>> 558 [4]
>> L3 incompletes:
>> 0 [0]
>> L2 channel errors:
>> 0 [0]
>> L2 mismatch timeouts:
>> 0 [0]
>> Carrier transitions: 0 Output
>> errors: [0]
>>
>>
>>
>> Regards,
>> Samit
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp@puck.nether.net
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>
>
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp