Guys , I m getting the DCU values and traffic bytes from the OID .1.3.6.1.4.1.2636.3.6 . but in cisco there we poll the traffic via a common 4 dight no. which we get by running the OID values .
below is the output taken from juniper router where i applied DCU for one of the customer my snmp team is asking the values which need to be pool , and PLOT via SNMP server so that we get the proper traffic pattern view via SNMP . {master} 17347...@mum-isp-aggr-rtr- show snmp mib walk .1.3.6.1.4.1.2636.3.6 jnxDCUSrcIfIndex.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 159 jnxDCUSrcIfIndex.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 159 jnxDCUDstClassName.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = default_class jnxDCUDstClassName.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = dest_class jnxDCUPackets.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 615392244 jnxDCUPackets.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 21986324 jnxDCUBytes.159.100.101.102.97.117.108.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0 = 166312660826 jnxDCUBytes.159.100.101.115.116.95.99.108.97.115.115.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 = 8027259994 jnxDcuStatsPackets.159.1.10.100.101.115.116.95.99.108.97.115.115 = 21986324 jnxDcuStatsPackets.159.1.13.100.101.102.97.117.108.116.95.99.108.97.115.115 = 615392572 jnxDcuStatsBytes.159.1.10.100.101.115.116.95.99.108.97.115.115 = 8027259994 jnxDcuStatsBytes.159.1.13.100.101.102.97.117.108.116.95.99.108.97.115.115 = 166312728017 jnxDcuStatsClName.159.1.10.100.101.115.116.95.99.108.97.115.115 = dest_class jnxDcuStatsClName.159.1.13.100.101.102.97.117.108.116.95.99.108.97.115.115 = default_class Regards, ---------- Forwarded message ---------- From: Masood Ahmad Shah <mas...@nexlinx.net.pk> Date: Feb 16, 2009 11:16 PM Subject: RE: [j-nsp] snmp oid for polling DCU To: shariq qamar <shariq....@gmail.com>, juniper-nsp@puck.nether.net This will take you on a snmp journey ..... ja...@r1# run show snmp mib walk 1 Regards, Masood -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of shariq qamar Sent: Monday, February 16, 2009 6:46 PM To: juniper-nsp@puck.nether.net Subject: [j-nsp] snmp oid for polling DCU Dear Techies , I m done with QPPB configuration on my Juniper M320 box junos 8.5R3.4 and successfully able to get counters for the destination calss i want to see the plot of counters via SNMP server . will anybody explain me how to get OID's values in juniper . what is the way to get OID's value for DCU so that same we poll via SNMP server -- Regards, Shariq Qamar, _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp -- Regards, Shariq Qamar, _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp