No, but you can: Have non 0 lo0 units in non-main instances Assign multiple IPs to the same lo0 unit
JUNOS can build adjacencies over all IPs on a given unit (moot for lo0, I know), and you can use policy to effect advertisement of a subset of the addresses shared by some unit. HTHs -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Marlon Duksa Sent: Wednesday, February 25, 2009 1:57 PM To: Juniper-Nsp Subject: [j-nsp] multiple loopback addresses Does anyone know if Juniper support multiple loopback interfaces for the same family.For example lo0 unit 0 family inet unit 1 family inet : For base routing instance or VRFs. I need to have multiple loopbacks in a single instance (base or VRF). I tried and it seems that Juniper can't support this. But I'm still in disbelief.... This is for MX or M series. Thanks, Marlon _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
