Yea, Juniper M Series does not support L2TPv3 at this time, and there is no roadmap for it anytime in the near future. You can use l2circuit over GRE/IP-IP tunnel.
JUNOS now support MPLS-in-GRE & MPLS-in-IP. You guys can now encapsulate the MPLS label stack for a packet with an IP header, making it possible to tunnel MPLS over networks that do not have MPLS enabled on their core routers. The following URL will confirm this. http://tinyurl.com/cb3dte Regards, Masood -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Samit Sent: Monday, March 09, 2009 3:32 PM To: juniper-nsp Subject: [j-nsp] L2TPv3 Hi, I read some old post in this list regarding L2TPv3 not being supported on M series, it is still not supported am I right? Regards, Samit _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp