Do a Google search and you will find much information on it. On Wed, Apr 1, 2009 at 12:20 PM, ChrisSerafin <ch...@chrisserafin.com> wrote: > Thiago Drechsel - Gmail wrote: >> >> Hi Jonathan. >> >> That's a good point for the future :-( >> But the problem is that I can't even establish PIM neighbors, with >> simple multicast packets. >> I can se PIM hello messages leaving olive, reaching my physical eth >> interface, but I can't see PIM hello entering olive. >> >> I think Olive OR VMware are unable to handle incoming PIM packets (not >> multicast packets, since OSPF, LDP are working fine with default >> configuration) >> >> I'll investigate and find the culprit! >> >> Ideas are welcome! >> >> Best regards. >> >> Thiago >> >> -----Original Message----- >> From: Jonathan Looney <jonloo...@gmail.com> >> To: Thiago Drechsel - Gmail <thiago.drech...@gmail.com> >> Cc: Juniper List <juniper-nsp@puck.nether.net> >> Subject: Re: [j-nsp] Olive question - PIM not working >> Date: Wed, 1 Apr 2009 10:38:52 -0400 >> >> Just a guess: depending on the PIM mode you are using, you may need a >> tunnel PIC (or equivalent - AS/MS PIC) in your RP to handle PIM >> decapsulation. As the Olive doesn't have a tunnel PIC, that may pose a >> problem. >> >> -Jon >> >> On Wed, Apr 1, 2009 at 10:14 AM, Thiago Drechsel - Gmail >> <thiago.drech...@gmail.com> wrote: >> Hi list! >> I have Olive boxes based on VMWare. I can connect these >> routers >> together with vlan-id tag since FreeBSD has been patched with >> syscall11.ko. Multicast seems to work, since ospf, rip and ldp >> have worked well between two >> routers. >> Olive Box (Junos 8.5R1.14) >> [Olive1]--em0.1-----------------------------em0.1--[Olive2] >> Unfortunately, PIM does not seem to work. >> Again, multicast has already been passed through >> those >> interfaces >> because I am running ospf and ldp on both routers and between >> external applications. >> Did anyone have the same problem? Any clue?? >> Thanks in advance! >> -- >> Thiago Drechsel >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> >> >> >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> ------------------------------------------------------------------------ >> >> >> No virus found in this incoming message. >> Checked by AVG - www.avg.com Version: 8.0.238 / Virus Database: >> 270.11.35/2034 - Release Date: 04/01/09 06:06:00 >> >> > > > > > > Where can I find Olive or the VM image of this? > > Thanks > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp >
-- It has to start somewhere, it has to start sometime. What better place than here? What better time than now? _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp