I'm evaluating an ISG 2000 and running into a problem when trying to insert the firewall between two BGP speaking peers. For purposes of port scarcity on the edge as well as to minimize physical topology changes during the evaluation, I'd like to do this in a single-armed configuration off the core using link aggregates and sub-interfaces.
When the firewall is in single-armed mode, BGP keepalives for sessions that traverse the firewall appear to be filtered out, resulting in session flapping. If I put the firewall in a two-armed configuration, BGP sessions traversing the firewall are stable. Policies are all set to "allow any any" Example: FAIL: peer1 -> ISG_eth2.1 -> ISG_ethe2.2 -(L2 via peer1)-> peer2 SUCCESS: peer1 -> - ISG_ethe2.1 -> ISG_ethe3.1 -> peer2 JTAC has been slow to respond and fairly unhelpful so far. I'm happy to send a simple arch diagram or further clarification to off-list replies. Thanks, Jason Dearborn _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp