Hi Guys I have recently installed a j2320 with source nat using the following guide:-
http://www.juniperforum.com/index.php/topic,7261.0.html Can dynamic nat also be applied for the remainder of internal ip's that are not defined in the source nat list? If so is there any guides on how to complete this? Nick ________________________________ -- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender. Any offers or quotation of service are subject to formal specification. Errors and omissions excepted. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Lumison. Finally, the recipient should check this email and any attachments for the presence of viruses. Lumison accept no liability for any damage caused by any virus transmitted by this email. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp