Hi all, I am attempting to test out an L2VPN that connects two GE interfaces on two separate J2320 routers via MPLS over GRE. I have the MPLS tunnel up and working and can ping using the 'ping mpls l2vpn' command. My problem is when I connect my devices to each GE port on the 2320s, I am unable to ping across.
Here's the relevant portions of the configs: J2320-1: ge-0/0/0 { mtu 1560; unit 0 { family inet { mtu 1532; address 172.16.1.2/30; } } } gr-0/0/0 { unit 1 { tunnel { source 10.0.0.3; destination 10.0.0.4; ttl 10; } family inet { mtu 1500; address 172.20.100.2/30; } family mpls; } } ge-0/0/1 { encapsulation ethernet-ccc; unit 0 { family ccc; } } lo0 { unit 0 { family inet { address 10.0.0.3/32; } } } ... rsvp { interface gr-0/0/0.1; } mpls { label-switched-path to_j2320-2 { to 10.0.0.4; } interface gr-0/0/0.1; interface ge-0/0/1.0; } bgp { group test { local-address 10.0.0.3; family l2vpn { signaling; } export ibgp; peer-as 65000; neighbor 10.0.0.4; } } ospf { traffic-engineering; area 0.0.0.0 { interface ge-0/0/0.0; interface lo0.0 { passive; } interface gr-0/0/0.1 { metric 65000; } } } layer2-test { instance-type l2vpn; interface ge-0/0/1.0; route-distinguisher 10.0.0.3:65000; vrf-import l2vpn-import; vrf-export l2vpn-export; protocols { l2vpn { encapsulation-type ethernet; no-control-word; site j2320-top { site-identifier 1; interface ge-0/0/1.0 { remote-site-id 2; } } } } } J2320-2: interfaces { ge-0/0/0 { mtu 1560; unit 0 { family inet { mtu 1532; address 172.16.2.2/30; } } } gr-0/0/0 { unit 1 { tunnel { source 10.0.0.4; destination 10.0.0.3; ttl 10; } family inet { mtu 1500; address 172.20.100.1/30; } family mpls; } } ge-0/0/1 { encapsulation ethernet-ccc; unit 0 { family ccc; } } lo0 { unit 0 { family inet { address 10.0.0.4/32; } } } } protocols { rsvp { interface gr-0/0/0.1; } mpls { label-switched-path to_j2320-1 { to 10.0.0.3; } interface gr-0/0/0.1; interface all; } bgp { group test { local-address 10.0.0.4; family l2vpn { signaling; } export ibgp; peer-as 65000; neighbor 10.0.0.3; } } ospf { traffic-engineering; area 0.0.0.0 { interface lo0.0 { passive; } interface ge-0/0/0.0; interface gr-0/0/0.1 { metric 65000; } } } } routing-instances { layer2-test { instance-type l2vpn; interface ge-0/0/1.0; route-distinguisher 10.0.0.4:65000; vrf-import l2vpn-import; vrf-export l2vpn-export; protocols { l2vpn { encapsulation-type ethernet; no-control-word; site j2320-bot { site-identifier 2; interface ge-0/0/1.0 { remote-site-id 1; } } } } } } I'm pretty sure I'm missing something obvious, but this is the first time I've messed with L2VPNs. thanks, evt _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp