Hi folks... I'm looking for feedback on EX3200 and EX4200 switches ... we are slowly starting to replace a few Cisco switches with Juniper EX series over time...
My question is specific to a low traffic server farm deployment. To clarify, the traffic levels are roughly 600-800Mb/s local switched traffic with only 100-200Mb/s of traffic actually going layer3 to next hop router. Entire farm is currently made up of only 2 VLAN's which primarily do not talk to one another much. Considering the idea of 5 48 port EX4200 switches with 10GE uplinks in a "ring" type setup or use the 5m cables on the back to do the same and save the 10GE ports on the front. The two end switches would have GigE connections going to our distribution layer switches (Cat6500's). Anyone doing something like this today and could share their opinions on performance, stability etc? Do these switches have any problems handling 100-200Mb/s of layer3 traffic while participating in OSPF? Many thanks, Paul _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp