Simon, I am not a Junos expert, but in general since you enabled link ldp between the PE routers and also a targteted ldp between PE's , you should be okay. did on quiet get what you meant by "without MPLS-LSP" ??? because you already have mpls lsp by enabling link ldp.
regards dinesh On Thu, Aug 6, 2009 at 9:35 AM, Simon Chen <simonche...@gmail.com> wrote: > Hi all, > > I read in the VPN configuration guide that LSPs between PEs are > required for VPLS. However, I am able to establish a VPLS setup using > LDP signalling, but without MPLS-LSP between PEs. > > Does anyone know why? My guess is that LSP is only required if you're > going for the BGP signalling, but not required if you're doing LDP. > Can anyone clarify this? > > Thanks. > -Simon > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp