On Thu, Aug 06, 2009 at 12:35:18PM -0400, Simon Chen wrote: > Hi all, > > I read in the VPN configuration guide that LSPs between PEs are > required for VPLS. However, I am able to establish a VPLS setup using > LDP signalling, but without MPLS-LSP between PEs. > > Does anyone know why? My guess is that LSP is only required if you're > going for the BGP signalling, but not required if you're doing LDP. > Can anyone clarify this?
This is from the documentation for Configuring LDP-Signaled LSPs http://www.juniper.net/techpubs/software/junos-security/junos-security95/junos-security-swconfig-interfaces-and-routing/mpls-config-editor-section.html#configure-ldp-section You need LSPs between PEs. You can use RSVP or LDP to signal these. Kari _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp