> Date: Fri, 21 Aug 2009 12:32:30 -0400 > From: Brendan Mannella <bmanne...@teraswitch.com> > Sender: juniper-nsp-boun...@puck.nether.net > > Hello, > > I have been battling trying to replace a failed hard disk on my juniper m7i. > I have finally got the disk to be recognized by the system. Now I need to > put all the partitions back. The router successfully boots from the CF so I > can run system commands. > > I tried.. > > r...@ibr1.pit> request system partition hard-disk > mount: /dev/ad1s1e on /altconfig: incorrect super block > ERROR: Can't access hard disk, aborting partition. > > Am I missing a command first?
request system snapshot partition but, if the disk is already partitioned for Windows, you should first start shell and 'dd if=/dev/zero of=/dev/adq bs=512 count=1024 This assumes the hard disk is ad1. You can confirm this with 'tail /var/run/dmesg' after starting shell or 'file show /var/run/dmesg' in the CLI. -- R. Kevin Oberman, Network Engineer Energy Sciences Network (ESnet) Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) E-mail: ober...@es.net Phone: +1 510 486-8634 Key fingerprint:059B 2DDF 031C 9BA3 14A4 EADA 927D EBB3 987B 3751 _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp