Brendan,
Your new hdd doesn't look to be in good shape, how about a quick health
check?
A smartd,
r...@radium-re0-tarique% smartd -oX /dev/ad1
Drive Command Successful, Extended Self test has begun
Please wait 17 minutes for test to complete
Use smartd -oA to abort test
Ensure alternate super block exists,
r...@radium-re0-tarique% newfs -N /dev/ad1s1a
r...@radium-re0-tarique% newfs -N /dev/ad1s1e
Perform filechecks,
<run these several times>
r...@radium-re0-tarique% fsck -f /dev/ad1s1a
r...@radium-re0-tarique% fsck -f /dev/ad1s1e
{-f : Force fsck to check `clean' filesystems when preening}
If the above fails, we could preen.
r...@radium-re0-tarique% fsck -p /dev/ad1s1a
r...@radium-re0-tarique% fsck -p /dev/ad1s1e
-p : Preen filesystems
Some of the corrective actions which are not correctable under the -p
option can result in some loss of data.
The above checks will determine our next step.
Thanks & Regards,
Tarique A. Nalkhande
-----Original Message-----
From: juniper-nsp-boun...@puck.nether.net
[mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Brendan
Mannella
Sent: Friday, August 21, 2009 10:03 PM
To: juniper-nsp@puck.nether.net
Subject: [j-nsp] Partition/Format new HD
Hello,
I have been battling trying to replace a failed hard disk on my juniper
m7i.
I have finally got the disk to be recognized by the system. Now I need
to
put all the partitions back. The router successfully boots from the CF
so I
can run system commands.
I tried..
r...@ibr1.pit> request system partition hard-disk
mount: /dev/ad1s1e on /altconfig: incorrect super block
ERROR: Can't access hard disk, aborting partition.
Am I missing a command first?
Thanks,
BRendan
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
