Hi folks... Does anyone know the tolerance of the LH SFP's from Juniper? We are trying to get an EX3200 switch configured and ready for production - have a case open at JTAC but haven't been able to resolve. In fairness to the JTAC engineer, I haven't had a lot of time to troubleshoot except for performing a software upgrade which has been completed (9.4)
The link is up/up from the EX3200 to a Cisco 6500 but the distance at the moment (while testing) is literally 15' or so. In the Cisco world we have no problem on such short distances but wondering if something is different or causing a problem for the Juniper. We see up/up and at one point were seeing a MAC address but unable to access the Management VLAN on the switch (only VLAN configured at the moment). Since the software upgrade we cannot see a MAC address even which has me wondering about the connection running too hot.... JTAC verified that the configuration is correct - Cisco TAC has verified that the IOS configuration is correct. Many thanks, Paul _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
