I run successfully the following configuration: evge...@mx480> show configuration interfaces xe-4/1/0 description "=== Summit X650 test ==="; flexible-vlan-tagging; encapsulation flexible-ethernet-services; unit 100 { description "=== Summit X650 test ==="; vlan-tags outer 4092 inner 100; family inet { address x.x.x.x/30; } }
and from Summit side configure vman ethertype 0x8100 >so if i do that the VMAN will become a VLAN. You simply change tag and VMAN won't became a vlan. IMHO I'll try to change ethertype from Juniper and work default from Summit. best regards, -- Evgeniy Aikashev network engineer JSC DATAGROUP Monday, October 19, 2009, 10:17:22 AM, Onam wrote: > Hello Evgeniy, > I made some test before with this ethertype and it works. The Extreme x450 > use both of them > 0x8100 for VLAN and 0x88a8 for VMAN so if i do that the VMAN will become a > VLAN. > I see that by default the Juniper router M10 use ethertype 0x8100, but when I > try to use > ethertype 0x88a8 the devices doens't see each other, I run a ping to the > other side with no response. >> Date: Mon, 19 Oct 2009 09:58:23 +0300 >> From: evge...@ip.datagroup.ua >> To: onamru...@hotmail.com >> CC: juniper-nsp@puck.nether.net >> Subject: Re: [j-nsp] Logical Interfaces 802.1ad >> >> Hello Onam, >> try to change ethertype from Summit side: >> >> configure vman ethertype 0x8100 >> >> best regards, >> -- >> Evgeniy Aikashev >> network engineer >> JSC DATAGROUP >> >> Monday, October 19, 2009, 3:30:51 AM, Onam wrote: >> >> > Hi experts, >> >> > I want to make logical interfaces on a physical interface ge-0/2/0 of a >> > Juniper M10 router to >> > connected to a the trunk port of a Summit Extreme x450 with the ethertype >> > 0x88a8 (IEEE 802.1ad). >> >> > I have the following configuration on the router. >> >> > ge-0/2/0 { >> > vlan-tagging; >> > gigether-options { >> > ethernet-switch-profile { >> > tag-protocol-id 0x88a8; >> > } >> > } >> > unit 50 { >> > vlan-tags outer 0x88a8.50; >> > family inet { >> > address 192.168.175.169/28; >> > } >> > } >> > } >> >> > I made the test with the 802.1q and it works but with 802.1ad didn't work. >> >> > Best regards. >> > >> > _________________________________________________________________ >> > News, entertainment and everything you care about at Live.com. Get it now! >> > http://www.live.com/getstarted.aspx >> > _______________________________________________ >> > juniper-nsp mailing list juniper-nsp@puck.nether.net >> > https://puck.nether.net/mailman/listinfo/juniper-nsp >> > Get news, entertainment and everything you care about at Live.com. Check it > out! _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp