Ricardo,
No need to run LDP (nor RSVP) in VPNv4 RR.
Use static default/summary route in inet.3 instead:
set routing-options rib inet.3 static route 0/0 discard no-install
Of course, you will lose "IGP metric" step in BGP path selection algorithm.
Rgds
Alex
----- Original Message -----
From: "Ricardo Tavares" <curu...@gmail.com>
To: "Juniper-Nsp" <juniper-nsp@puck.nether.net>
Sent: Wednesday, December 02, 2009 3:45 PM
Subject: [j-nsp] LDP/MPLS is mandatory in the route-reflector bgp
vpnv4uplink?
Hi guys,
I did some tests using JunOS 9.4 acting as BGP reflector for vpnv4
address-family and found that when I disable LDP in the uplink to the MPLS
core the routes sent by this reflector are discarded by the PEs (Cisco or
Juniper) but the routes advertised by a Cisco router acting as vpnv4
reflector works fine without LDP.
Is this a normal behavior? If yes someone can explain the process? If yes
maybe there is a knob to control this?
Best Regards,
Ricardo Tavares
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
