Yes, no problems supporting all of this. Thanks,
Barny Sanchez | Consulting Engineer - Security Solutions | Juniper Networks | Direct: +1.774.318.9140 | bar...@juniper.net <mailto:bar...@juniper.net> (Message sent via my mobile device, sorry for any typos and shortness of my response) ----- Original Message ----- From: juniper-nsp-boun...@puck.nether.net <juniper-nsp-boun...@puck.nether.net> To: juniper-nsp@puck.nether.net <juniper-nsp@puck.nether.net> Sent: Sun Mar 07 10:02:29 2010 Subject: [j-nsp] ISG 1000 Hi I have got a ISG 1000 firewall which has the default 4 interfaces, i need to configure 4 zones on a single interface and 1 zone which is the untrusted zone on another interface , the other 2 interfaces will be used for HA and heartbeat as there are 2 ISG 1000 my point is - can i have 4 different zones on a single interface these are all trusted (inside) and require to communicate with one another and also with the outside interface - can the DMZ zone and the trusted zone be binded with the same interface (sub-interfaces are proposed using vlan tagging) will this type of solution work. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp