Can you share a sanitized config?
________________________________ From: Nick Ryce <nick.r...@lumison.net> To: "juniper-nsp@puck.nether.net" <juniper-nsp@puck.nether.net> Sent: Fri, April 30, 2010 4:08:21 AM Subject: [j-nsp] Juniper IPSEC VPN Is there a default speed that a juniper ipec tunnel runs at? We have an asa5510 and an 1812 where the ipsec tunnel was running near full speed on a 10 meg link. We swapped the 1812 with a 2320 running 9.6R2.8 and we are seeing lost packets and slow throughput. The tunnel does not drop once established but packets continue to be lost. Any ideas? Nick -- Nick Ryce Network Engineer Lumison 08451199999 P.S. do you love Lumison? Why not take a moment and vote for us? http://bit.ly/Vote_Lumison -- This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender. Any offers or quotation of service are subject to formal specification. Errors and omissions excepted. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of Lumison. Finally, the recipient should check this email and any attachments for the presence of viruses. Lumison accept no liability for any damage caused by any virus transmitted by this email. _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
