Have you disabled adaptive standby? I can look up the configuration in a few if you don't have it.
Sent from my iThing On Jun 30, 2010, at 5:46 AM, Thomas Eichhorn <t...@te3networks.de> wrote: > Thanks for all your help, > I cannot simply remove the disk nor the cf card, > the box is to far away. > > I now tried to remove the disk from the boot list, > so it does not get initialized and the box completely runs > from CF - If that doesn't work I will try the other way (disabling > cf and enabling disk). > > If this works I will give feedback here so that people also > running into that problem will find it. > > Tom > > Am 30.06.2010 10:51, schrieb Marcin Kucharczyk: >> On Wednesday 30 of June 2010 10:10:24 Akhmedd Aly wrote: >>> Hi Marcin, >>> >>> we have the same problems with M7Is in the may: >>> *M7i> panic: ad_ioctl:1275539168: ad1: Standby not armed but state is in >>> valid: state="ARMED"* >>> >>> And all of this problems come after installing (we never did not use >>> internal CF in its before) Compact Flash 1GB (not from official Juniper >>> upgrade kit), its also rebooted every 3-4 hours with the same PANIC >>> message. >>> >>> After removing CFs we do not have this problems. So I think that it was not >>> problems with internal disks... >>> >> >> Hi, >> >> our router had rebooted every 4 hours and 21 minutes (exactly). As I wrote >> to >> Thomas we had removed HDD, and now router runs on CF only. Our CF isn't from >> official Juniper upgrade kit, it's regular Kingston Standard 4GB CF Type 1. >> >> It's a pity that CF and HDD can't run together. >> >> Regards, >> Marcin >> >>> >>> >>> 2010/6/22 Marcin Kucharczyk <m.kucharc...@net.icm.edu.pl> >>> >>>> Hello, >>>> >>>> tonight one of ours M7i crashed with strange log entry: >>>> >>>> savecore: reboot after panic: ad_ioctl:1277186066: ad1: Standby not armed >>>> but >>>> state is invalid: state="ARMED" >>>> >>>> Disk was replaced 2 weeks ago. Yesterday we inserted new compact flash >>>> card (there wasn't any before). We upgraded Junos to 10.0R3.10 also. Do >>>> you have any idea what could happened? >>>> >>>> Regards, >>>> Marcin Kucharczyk >> _______________________________________________ >> juniper-nsp mailing list juniper-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp