Assuming its martini l2ckt you are talking about, you could establish l2ckt with lt- interfaces. Peer 2 units of lt- with each other. Put one unit in inet.0 with IP address configured and use other unit with ethernet ccc or vlan-ccc encap to establish the l2ckt. You can then ping the remote IP from inet.0 once l2ckt is up. With this you do not need any physical CE links.
I haven't tested this on J. But I know it works fine on M/T. Thanks, Nilesh On 7/22/10 10:49 AM, "Jason Lixfeld" <ja...@lixfeld.ca> wrote: > I'm trying to test some C to J EoMPLS interoperability, but the only J box > that I have doesn't have any free interfaces on it, so I have nowhere to > connect a test CE and use the CE to ping the far end. Is there any way to > stick a subnet on to an l2circuit directly instead of having to use a physical > interface and a physical CE? > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp