Hi, had the same problem when I first unpacked my SRX100. It requested an IP address but was not reachable at all by that address. I don't remember the exact way i finally fixed it that night, but there was something wrong with the VLAN/port-assignments (and maybe even zones) in the factory default config. You might want to try another port first, as fe-0/0/0 is [supposed to be] in the untrust and fe-0/0/1-7 in trust zone. If this doesn't work, check the config via serial cable and put one specific port into trust and manually assign an IP address to it.
I clearly remember that for 1 or 2 hours I thought the device was broken, as it did not work at all, even following the quickstart guide. best regards, Volker Stefan Schlesinger wrote: > Hello Folks, > > I'm trying to reset my SRX100. When I press the Reset button the status > light turns amber, the SRX requests an IP address from my DHCP server, > I see an ARP entry, but I cannot ping it nor connect to it > using telnet/ssh/http. > > What could be the reason for this and how can I do a factory reset? > > Thanks, > > Stefan. > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp