Hi, We have two of these boxes with the Advanced L3 Licenses, there is no need to install the license apparently, nor is there a way to generate the key on the juniper site. The boxes work fine holding 2 full tables with vrf's without us installing the licenses, so I suspect that it is either installed when the box is shipped, or it is currently an honesty based license.
Cheers, Callum Barr Network Engineer WorldxChange Communications -----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Giuliano Cardozo Medalha Sent: Thursday, September 23, 2010 12:55 PM To: juniper-nsp@puck.nether.net Subject: [j-nsp] MX80 ADV-R License People, Does anyone know how to install the following license into the box: 1 x S-MX80-ADV-R License to support full scale L3 route and L3 VPN on MX80 We have received a paper describing the license and a pen drive. Does anyone bought a MX80-48T and have the license to install ? How can we check if the license is correctly installed ? Thanks a lot, Giuliano _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp