Hi all, I'm curious about what people have found is the best way to manage interface configurations on EX-series devices. There are a number of ways to apply configuration to interfaces -- direct to each interface, using interface-ranges etc.
We've been burnt a couple of times with people making adjustments to interface-ranges and not paying close enough attention to the net effect of their change (e.g. leaving out all interfaces on a switch). Direct application of config to interfaces, while precise, kind of feels 'wrong' as JUNOS provides more elegant ways to achieve the same end result. Maybe in carefully planned, static environments where access port VLAN assignments and other port specific configs rarely change, interface-ranges are more workable. Or maybe we're just doing it wrong. I'm hoping that this sparks some discussion. What works best for you? Cheers, Dale _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp