On 12/03/10 05:46, Charlie Allom wrote: > I have tried 10.0R2.10, 10.0S10.1 and 10.0R4.7 - they are all the
it seems that with the EX you have to play the 'upgrade to the next daily image' game, a lot. > same. We only have 165 terms. since this is a tcam based platform it's not just 'terms' that matter, but the combinatorial effect of the contents of the terms... A that references 2 sources & 2 destinations is 4 entries in the TCAM. Add ports/protocols and that number can increase, dramatically. > sw0.cll fpc2 dfw_change_term_filter:1522 H/W cutover failed (no space > left on device) for filter (7) change end! > > that was amongst lots of others.. one "no space left" for each FPC. there's a rather short set of entries permitted ... and you can't allocated specifically to the 'pfe' (the equivalent part on the EX), of which there are (I believe) 3 on the 4200. > I've asked Juniper for an RMA and we will see if that fixes it. I doubt that'll fix your issue...but who knows :) -chris _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp