Hi there,
How do you measure CPU? Is it FPC CPU or MS-PIC CPU?
"show services service-set summary" will show you the MS-PIC CPU per
service-set and my guess it could be very different from FPC CPU in "show
chassis fpc".
HTH
Regards
Alex
----- Original Message -----
From: "Derick Winkworth" <dwinkwo...@att.net>
To: <juniper-nsp@puck.nether.net>
Sent: Monday, December 20, 2010 7:58 PM
Subject: Re: [j-nsp] fpc2 message...
GRE, IPSec, and NAT. It is L3 mode.
________________________________
From: Nilesh Khambal <nkham...@juniper.net>
To: Derick Winkworth <dwinkwo...@att.net>; "juniper-nsp@puck.nether.net"
<juniper-nsp@puck.nether.net>
Sent: Mon, December 20, 2010 12:09:26 PM
Subject: Re: [j-nsp] fpc2 message...
Derek,
What is the PIC being used for? Is it in L2 mode or L3 mode?
Thanks,
Nilesh.
On 12/20/10 9:18 AM, "Derick Winkworth" <dwinkwo...@att.net> wrote:
Anyone know why this would be happening with an ms-400 service-pic? Its
running at 2-4% CPU and less than one 1% memory utilization...
#########
Dec 20 10:05:15 galaxy-01 fpc2 Transient flow-control asserted by MAC on
sp-2/2
for 1 seconds
Dec 20 10:05:16 galaxy-01 fpc2 Transient flow-control asserted by MAC on
sp-2/2
for 2 seconds
Dec 20 10:05:17 galaxy-01 fpc2 Prolonged flow-control asserted by MAC on
sp-2/2
Dec 20 10:05:20 galaxy-01 fpc2 MAC flow-control cleared on sp-2/2
#########
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
