Hey folks Ran across a weird issue today on a new EX4200-48T switch. Switch boots up and during so I see this (sorry for the length of the post):
Trying to mount root from ufs:/dev/da0s1a Attaching /packages/jbase via /dev/mdctl... Mounted jbase package on /dev/md0... Verified manifest signed by PackageProduction_10_0_0 Verified jboot signed by PackageProduction_10_0_0 Verified jbase-10.0R4.7 signed by PackageProduction_10_0_0 /packages/jcrypto-ex-10.0R4.7 not present. /packages/jdocs-ex-10.0R4.7 not present. Mounted jkernel-ex package on /dev/md1... Verified manifest signed by PackageProduction_10_0_0 Verified jkernel-ex-10.0R4.7 signed by PackageProduction_10_0_0 Mounted jpfe-ex42x package on /dev/md2... Verified manifest signed by PackageProduction_10_0_0 Verified jpfe-ex42x-10.0R4.7 signed by PackageProduction_10_0_0 Mounted jroute-ex package on /dev/md3... Verified manifest signed by PackageProduction_10_0_0 Verified jroute-ex-10.0R4.7 signed by PackageProduction_10_0_0 /packages/jswitch-ex-10.0R4.7 not present. Mounted jweb-ex package on /dev/md4... Verified manifest signed by PackageProduction_10_0_0 Verified jweb-ex-10.0R4.7 signed by PackageProduction_10_0_0 Executing /packages/mnt/jweb-ex-10.0R4.7/mount.post.. Automatic reboot in progress... FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 48430 free (46 frags, 6048 blocks, 0.0% fragmentation) FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 28254 free (38 frags, 3527 blocks, 0.1% fragmentation) FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 62228 free (244 frags, 7748 blocks, 0.4% fragmentation) FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 160996 free (28 frags, 20121 blocks, 0.0% fragmentation) FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 160996 free (28 frags, 20121 blocks, 0.0% fragmentation) Creating initial configuration...mgd: error: Couldn't open lib "/usr/lib/dd//libjcrypto-dd.so": Cannot open "/usr/lib/dd//libjcrypto-dd.so" mgd: error: Couldn't open lib "/usr/lib/dd//libjcrypto_junos-dd.so": Cannot open "/usr/lib/dd//libjcrypto_junos-dd.so" mgd: error: Couldn't open lib "/usr/lib/dd//libjdocs-dd.so": Cannot open "/usr/lib/dd//libjdocs-dd.so" /config/juniper.conf:294:(8) syntax error at 'rstp' [edit protocols] 'rstp;' syntax error /config/juniper.conf:297:(5) error recovery ignores input until this point at '}' [edit protocols] '}' error recovery ignores input until this point /config/juniper.conf:300:(5) error recovery ignores input until this point at '}' [edit protocols] '}' error recovery ignores input until this point /config/juniper.conf:304:(1) error recovery ignores input until this point at '}' [edit] '}' error recovery ignores input until this point [edit system services ssh] 'ssh' warning: daemon binary /usr/sbin/sshd not found mgd: commit complete Setting initial options: debugger_on_panic=NO debugger_on_break=NO. Starting optional daemons: OK: extracted home directories. . Doing initial network setup: . Initial interface configuration: additional daemons:. Additional routing options:kern.module_path: /boot//kernel;/bootLoading the NETPFE ethernet module /modules -> /booLoading the EX-series platform NETPFE module t//kernel;/boot/modules;/modules grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1 grat_arp_delay=${grat_arp_delay}: net.link.ether.inet.grat_arp_delay: 0 -> 0 kld netpfe drv: ifpfed_ethkld platform: ex_ifpfe if_vcpkern.module_path: /boot//kernel;/boot/modules;/modules -> /boot//kernel;/boot/modules;/modules;/modules/peertype kld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere. Doing additional network setup:. Starting final network daemons:. setting ldconfig path: /usr/lib /opt/lib ldconfig: warning: /opt/lib: No such file or directory starting standard daemons: cron. Local package initialization:. kern.securelevel: -1 -> 1 starting local daemons:. Thu Oct 14 06:24:18 UTC 2010 Amnesiac (ttyu0) So I thought that perhaps the JunOS install is corrupt and rebooted with my USB drive connected. Ran through the installation and it wont complete: loader> install file:///jinstall-ex-4200-10.0R4.7-domestic-signed.tgz Package /jinstall-ex-4200-10.0R4.7-domestic-signed.tgz is signed... /kernel data=0x4efa0c+0x51a94 syms=[0x4+0x4e100+0x4+0x707d3] Kernel entry at 0xa00000e0 ... GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb platform_early_bootinit: EX Series Early Boot Initialization Copyright (c) 1996-2010, Juniper Networks, Inc. All rights reserved. Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. JUNOS 10.0R4.7 #0: 2010-08-22 02:45:23 UTC buil...@ormonth.juniper.net:/volume/build/junos/10.0/release/10.0R4.7/obj-po Timecounter "decrementer" frequency 50000000 Hz quality 0 cpu0: Freescale e500v2 core revision 2.2 cpu0: HID0 80004080<EMCP,TBEN,EN_MAS7_UPDATE> real memory = 1044381696 (996 MB) avail memory = 1022767104 (975 MB) ETHERNET SOCKET BRIDGE initialising Initializing EXSERIES platform properties ... nexus0: <PPC e500 Nexus device> ocpbus0: <on-chip peripheral bus> on nexus0 openpic0: <OpenPIC in on-chip peripheral bus> iomem 0xfef40000-0xfef600b3 on ocpbus0 uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on ocpbus0 uart0: console (9600,n,8,1) uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on ocpbus0 lbc0: <Freescale 8533 Local Bus Controller> iomem 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0 cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0 syspld0 iomem 0xff000000-0xff00ffff on lbc0 tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 on ocpbus0 tsec0: hardware MAC address b0:c6:9a:61:96:7f miibus0: <MII bus> on tsec0 e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto pcib0: <Freescale MPC8544 PCI host controller> iomem 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0 pci0: <PCI bus> on pcib0 pci0: <serial bus, USB> at device 18.0 (no driver attached) ehci0: <Philips ISP156x USB 2.0 controller> mem 0xf0001000-0xf00010ff irq 22 at device 18.2 on pci0 usb0: EHCI version 1.0 usb0: <Philips ISP156x USB 2.0 controller> on ehci0 usb0: USB revision 2.0 uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 2 umass1: SanDisk MobileMate Micro, rev 2.00/94.07, addr 3 pcib1: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff irq 42 on ocpbus0 pci1: <PCI bus> on pcib1 pcib2: <PCI-PCI bridge> at device 0.0 on pci1 pci2: <PCI bus> on pcib2 pci2: <memory> at device 0.0 (no driver attached) pcib3: <Freescale MPC8544 PCI Express host controller> iomem 0xfef09000-0xfef09fff,0xe4000000-0xe7ffffff,0xec100000-0xec1fffff irq 41 on ocpbus0 pci3: <PCI bus> on pcib3 pcib4: <PCI-PCI bridge> at device 0.0 on pci3 pci4: <PCI bus> on pcib4 pci4: <memory> at device 0.0 (no driver attached) pcib5: <Freescale MPC8544 PCI Express host controller> iomem 0xfef0b000-0xfef0bfff,0xe8000000-0xebffffff,0xec200000-0xec2fffff irq 43 on ocpbus0 pci5: <PCI bus> on pcib5 pcib6: <PCI-PCI bridge> at device 0.0 on pci5 pci6: <PCI bus> on pcib6 pci6: <memory> at device 0.0 (no driver attached) i2c0: <MPC85XX OnChip i2c controller> iomem 0xfef03000-0xfef03014 irq 59 on ocpbus0 i2c1: <MPC85XX OnChip i2c controller> iomem 0xfef03100-0xfef03114 irq 59 on ocpbus0 Timecounters tick every 10.000 msec md0: Preloaded image </isofs-install-ex> 10477568 bytes at 0xa05ffd7c da1 at umass-sim1 bus 1 target 0 lun 0 da1: <Generic STORAGE DEVICE 9407> Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: 1910MB (3911680 512 byte sectors: 255H 63S/T 243C) da0 at umass-sim0 bus 0 target 0 lun 0 da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) Trying to mount root from cd9660:/dev/md0 FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 160996 free (28 frags, 20121 blocks, 0.0% fragmentation) tunefs: soft updates remains unchanged as disabled FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 28254 free (38 frags, 3527 blocks, 0.1% fragmentation) /dev/da0s2a: 187.2MB (383352 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 46.80MB, 2995 blks, 6016 inodes. with soft updates super-block backups (for fsck -b #) at: 32, 95872, 191712, 287552 /dev/da0s2f: 124.8MB (255584 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 31.20MB, 1997 blks, 4096 inodes. with soft updates super-block backups (for fsck -b #) at: 32, 63936, 127840, 191744 Installing disk1:/jinstall-ex-4200-10.0R4.7-domestic-signed.tgz /dev/da0s3d: 319.6MB (654524 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 79.91MB, 5114 blks, 10240 inodes. super-block backups (for fsck -b #) at: 32, 163680, 327328, 490976 tty: not found tty: not found tty: not found tty: not found date: connect: Can't assign requested address Checking package integrity... Verified SHA1 checksum of jbase-ex-10.0R4.7.tgz Verified SHA1 checksum of jboot-ex-10.0R4.7.tgz Verified SHA1 checksum of jcrypto-ex-10.0R4.7.tgz Verified SHA1 checksum of jdocs-ex-10.0R4.7.tgz Verified SHA1 checksum of jkernel-ex-10.0R4.7.tgz Verified SHA1 checksum of jpfe-ex42x-10.0R4.7.tgz Verified SHA1 checksum of jroute-ex-10.0R4.7.tgz Verified SHA1 checksum of jswitch-ex-10.0R4.7.tgz Verified SHA1 checksum of jweb-ex-10.0R4.7.tgz Running requirements check first for jbundle-ex-4200-10.0R4.7-domestic... Running pre-install for jbundle-ex-4200-10.0R4.7-domestic... Installing jbundle-ex-4200-10.0R4.7-domestic in /tmp/pa2398.26/jbundle-ex-4200-10.0R4.7-domestic.x2398... Running post-install for jbundle-ex-4200-10.0R4.7-domestic... Adding jkernel-ex... Adding jcrypto-ex... Adding jdocs-ex... Adding jswitch-ex... Adding jpfe-ex42x... Adding jroute-ex... Adding jweb-ex... Saving home directories *** The installer exited with status 2 *** *** The installation is unsuccessful!!! *** A shell has been started. type exit<cr> to reboot: Is this a bad switch?? Thanks in advance, Paul _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp