Hi Paul, Look at this KB: (explains It all.. :))
http://kb.juniper.net/InfoCenter/index?page=content&id=KB11752 Maarten -----Oorspronkelijk bericht----- Van: Paul Stewart [mailto:p...@paulstewart.org] Verzonden: dinsdag 11 januari 2011 0:14 Aan: 'Maarten van der Hoek' CC: 'juniper-nsp' Onderwerp: RE: [j-nsp] EX4200 Problem - Bad Switch? No - never tried that... have to find a doc on how to do it ;) Thanks for the suggestion.... Paul -----Original Message----- From: Maarten van der Hoek [mailto:maar...@vanderhoek.nl] Sent: January-10-11 5:45 PM To: 'Paul Stewart' Cc: 'juniper-nsp' Subject: RE: [j-nsp] EX4200 Problem - Bad Switch? Hi Paul, We had similar issue's with 4200 switches... The only installation way that helped us was using the TFTP server method! Using f.e. USB made things even worse ... :( Did you try TFTP ? Maarten -----Oorspronkelijk bericht----- Van: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] Namens Paul Stewart Verzonden: maandag 10 januari 2011 23:37 Aan: 'Joe Hamelin' CC: 'juniper-nsp' Onderwerp: Re: [j-nsp] EX4200 Problem - Bad Switch? Thanks.. this was a brand new out of the box switch. It had been powered up once successfully and worked "fine" at that point. Then it was powered down and brought back up and now problems... Tried 3 times now to reinstall JunOS and no luck ;( -----Original Message----- From: neth...@gmail.com [mailto:neth...@gmail.com] On Behalf Of Joe Hamelin Sent: January-10-11 4:07 PM To: Paul Stewart Cc: juniper-nsp Subject: Re: [j-nsp] EX4200 Problem - Bad Switch? It looks like you're missing a few libraries (files) in your install. Re-install JunOS. -- Joe Hamelin, W7COM, Tulalip, WA, 360-474-7474 On Mon, Jan 10, 2011 at 12:53 PM, Paul Stewart <p...@paulstewart.org> wrote: > Hey folks > > Ran across a weird issue today on a new EX4200-48T switch. Switch > boots up > and during so I see this (sorry for the length of the post): > > Trying to mount root from ufs:/dev/da0s1a Attaching /packages/jbase > via /dev/mdctl... > Mounted jbase package on /dev/md0... > Verified manifest signed by PackageProduction_10_0_0 Verified jboot > signed by PackageProduction_10_0_0 Verified jbase-10.0R4.7 signed by > PackageProduction_10_0_0 > /packages/jcrypto-ex-10.0R4.7 not present. > /packages/jdocs-ex-10.0R4.7 not present. > Mounted jkernel-ex package on /dev/md1... > Verified manifest signed by PackageProduction_10_0_0 Verified > jkernel-ex-10.0R4.7 signed by PackageProduction_10_0_0 Mounted > jpfe-ex42x package on /dev/md2... > Verified manifest signed by PackageProduction_10_0_0 Verified > jpfe-ex42x-10.0R4.7 signed by PackageProduction_10_0_0 Mounted > jroute-ex package on /dev/md3... > Verified manifest signed by PackageProduction_10_0_0 Verified > jroute-ex-10.0R4.7 signed by PackageProduction_10_0_0 > /packages/jswitch-ex-10.0R4.7 not present. > Mounted jweb-ex package on /dev/md4... > Verified manifest signed by PackageProduction_10_0_0 Verified > jweb-ex-10.0R4.7 signed by PackageProduction_10_0_0 Executing > /packages/mnt/jweb-ex-10.0R4.7/mount.post.. > Automatic reboot in progress... > FILE SYSTEM CLEAN; SKIPPING CHECKS > clean, 48430 free (46 frags, 6048 blocks, 0.0% fragmentation) FILE > SYSTEM CLEAN; SKIPPING CHECKS clean, 28254 free (38 frags, 3527 > blocks, 0.1% fragmentation) FILE SYSTEM CLEAN; SKIPPING CHECKS clean, > 62228 free (244 frags, 7748 blocks, 0.4% fragmentation) FILE SYSTEM > CLEAN; SKIPPING CHECKS clean, 160996 free (28 frags, 20121 blocks, > 0.0% fragmentation) FILE SYSTEM CLEAN; SKIPPING CHECKS clean, 160996 > free (28 frags, 20121 blocks, 0.0% fragmentation) Creating initial > configuration...mgd: error: Couldn't open lib > "/usr/lib/dd//libjcrypto-dd.so": Cannot open "/usr/lib/dd//libjcrypto-dd.so" > mgd: error: Couldn't open lib "/usr/lib/dd//libjcrypto_junos-dd.so": Cannot > open "/usr/lib/dd//libjcrypto_junos-dd.so" > mgd: error: Couldn't open lib "/usr/lib/dd//libjdocs-dd.so": Cannot > open "/usr/lib/dd//libjdocs-dd.so" > /config/juniper.conf:294:(8) syntax error at 'rstp' > [edit protocols] > 'rstp;' > syntax error > /config/juniper.conf:297:(5) error recovery ignores input until this > point at '}' > [edit protocols] > '}' > error recovery ignores input until this point > /config/juniper.conf:300:(5) error recovery ignores input until this > point at '}' > [edit protocols] > '}' > error recovery ignores input until this point > /config/juniper.conf:304:(1) error recovery ignores input until this > point at '}' > [edit] > '}' > error recovery ignores input until this point [edit system > services ssh] > 'ssh' > warning: daemon binary /usr/sbin/sshd not found > mgd: commit complete > Setting initial options: debugger_on_panic=NO debugger_on_break=NO. > Starting optional daemons: OK: extracted home directories. > . > Doing initial network setup: > . > Initial interface configuration: > additional daemons:. > Additional routing options:kern.module_path: > /boot//kernel;/bootLoading the > NETPFE ethernet module > /modules -> /booLoading the EX-series platform NETPFE module > t//kernel;/boot/modules;/modules > grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1 > grat_arp_delay=${grat_arp_delay}: net.link.ether.inet.grat_arp_delay: > 0 -> 0 > kld netpfe drv: ifpfed_ethkld platform: ex_ifpfe if_vcpkern.module_path: > /boot//kernel;/boot/modules;/modules -> > /boot//kernel;/boot/modules;/modules;/modules/peertype > kld peertype: peertype_hcm peertype_pfem peertype_sfi peertype_slavere. > Doing additional network setup:. > Starting final network daemons:. > setting ldconfig path: /usr/lib /opt/lib > ldconfig: warning: /opt/lib: No such file or directory starting > standard daemons: cron. > Local package initialization:. > kern.securelevel: -1 -> 1 > starting local daemons:. > Thu Oct 14 06:24:18 UTC 2010 > > Amnesiac (ttyu0) > > > > So I thought that perhaps the JunOS install is corrupt and rebooted > with my > USB drive connected. Ran through the installation and it wont complete: > > > loader> install file:///jinstall-ex-4200-10.0R4.7-domestic-signed.tgz > Package /jinstall-ex-4200-10.0R4.7-domestic-signed.tgz is signed... > /kernel data=0x4efa0c+0x51a94 syms=[0x4+0x4e100+0x4+0x707d3] Kernel > entry at 0xa00000e0 ... > GDB: no debug ports present > KDB: debugger backends: ddb > KDB: current backend: ddb > platform_early_bootinit: EX Series Early Boot Initialization Copyright > (c) 1996-2010, Juniper Networks, Inc. > All rights reserved. > Copyright (c) 1992-2006 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, > 1994 > The Regents of the University of California. All rights reserved. > JUNOS 10.0R4.7 #0: 2010-08-22 02:45:23 UTC > > buil...@ormonth.juniper.net:/volume/build/junos/10.0/release/10.0R4.7/obj-po > Timecounter "decrementer" frequency 50000000 Hz quality 0 > cpu0: Freescale e500v2 core revision 2.2 > cpu0: HID0 80004080<EMCP,TBEN,EN_MAS7_UPDATE> > real memory = 1044381696 (996 MB) > avail memory = 1022767104 (975 MB) > ETHERNET SOCKET BRIDGE initialising > Initializing EXSERIES platform properties ... > nexus0: <PPC e500 Nexus device> > ocpbus0: <on-chip peripheral bus> on nexus0 > openpic0: <OpenPIC in on-chip peripheral bus> iomem > 0xfef40000-0xfef600b3 on > ocpbus0 > uart0: <16550 or compatible> iomem 0xfef04500-0xfef0450f irq 58 on > ocpbus0 > uart0: console (9600,n,8,1) > uart1: <16550 or compatible> iomem 0xfef04600-0xfef0460f irq 58 on > ocpbus0 > lbc0: <Freescale 8533 Local Bus Controller> iomem > 0xfef05000-0xfef05fff,0xff000000-0xffffffff irq 22 on ocpbus0 > cfi0: <AMD/Fujitsu - 8MB> iomem 0xff800000-0xffffffff on lbc0 > syspld0 iomem 0xff000000-0xff00ffff on lbc0 > tsec0: <eTSEC ethernet controller> iomem 0xfef24000-0xfef24fff irq 45,46,50 > on ocpbus0 > tsec0: hardware MAC address b0:c6:9a:61:96:7f > miibus0: <MII bus> on tsec0 > e1000phy0: <Marvell 88E1112 Gigabit PHY> on miibus0 > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, > auto > pcib0: <Freescale MPC8544 PCI host controller> iomem > 0xfef08000-0xfef08fff,0xf0000000-0xf3ffffff on ocpbus0 > pci0: <PCI bus> on pcib0 > pci0: <serial bus, USB> at device 18.0 (no driver attached) > ehci0: <Philips ISP156x USB 2.0 controller> mem 0xf0001000-0xf00010ff > irq 22 > at device 18.2 on pci0 > usb0: EHCI version 1.0 > usb0: <Philips ISP156x USB 2.0 controller> on ehci0 > usb0: USB revision 2.0 > uhub0: Philips EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, > addr 2 > umass1: SanDisk MobileMate Micro, rev 2.00/94.07, addr 3 > pcib1: <Freescale MPC8544 PCI Express host controller> iomem > 0xfef0a000-0xfef0afff,0xe0000000-0xe3ffffff,0xec000000-0xec0fffff irq > 42 on > ocpbus0 > pci1: <PCI bus> on pcib1 > pcib2: <PCI-PCI bridge> at device 0.0 on pci1 > pci2: <PCI bus> on pcib2 > pci2: <memory> at device 0.0 (no driver attached) > pcib3: <Freescale MPC8544 PCI Express host controller> iomem > 0xfef09000-0xfef09fff,0xe4000000-0xe7ffffff,0xec100000-0xec1fffff irq > 41 on > ocpbus0 > pci3: <PCI bus> on pcib3 > pcib4: <PCI-PCI bridge> at device 0.0 on pci3 > pci4: <PCI bus> on pcib4 > pci4: <memory> at device 0.0 (no driver attached) > pcib5: <Freescale MPC8544 PCI Express host controller> iomem > 0xfef0b000-0xfef0bfff,0xe8000000-0xebffffff,0xec200000-0xec2fffff irq > 43 on > ocpbus0 > pci5: <PCI bus> on pcib5 > pcib6: <PCI-PCI bridge> at device 0.0 on pci5 > pci6: <PCI bus> on pcib6 > pci6: <memory> at device 0.0 (no driver attached) > i2c0: <MPC85XX OnChip i2c controller> iomem 0xfef03000-0xfef03014 irq > 59 on > ocpbus0 > i2c1: <MPC85XX OnChip i2c controller> iomem 0xfef03100-0xfef03114 irq > 59 on > ocpbus0 > Timecounters tick every 10.000 msec > md0: Preloaded image </isofs-install-ex> 10477568 bytes at 0xa05ffd7c > da1 at umass-sim1 bus 1 target 0 lun 0 > da1: <Generic STORAGE DEVICE 9407> Removable Direct Access SCSI-0 > device > da1: 40.000MB/s transfers > da1: 1910MB (3911680 512 byte sectors: 255H 63S/T 243C) > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <ST ST72682 2.10> Removable Direct Access SCSI-2 device > da0: 40.000MB/s transfers > da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C) Trying to > mount root from cd9660:/dev/md0 FILE SYSTEM CLEAN; SKIPPING CHECKS > clean, 160996 free (28 frags, 20121 blocks, 0.0% fragmentation) > tunefs: soft updates remains unchanged as disabled FILE SYSTEM CLEAN; > SKIPPING CHECKS clean, 28254 free (38 frags, 3527 blocks, 0.1% > fragmentation) > /dev/da0s2a: 187.2MB (383352 sectors) block size 16384, fragment size > 2048 > using 4 cylinder groups of 46.80MB, 2995 blks, 6016 inodes. > with soft updates > super-block backups (for fsck -b #) at: > 32, 95872, 191712, 287552 > /dev/da0s2f: 124.8MB (255584 sectors) block size 16384, fragment size > 2048 > using 4 cylinder groups of 31.20MB, 1997 blks, 4096 inodes. > with soft updates > super-block backups (for fsck -b #) at: > 32, 63936, 127840, 191744 > Installing disk1:/jinstall-ex-4200-10.0R4.7-domestic-signed.tgz > /dev/da0s3d: 319.6MB (654524 sectors) block size 16384, fragment size > 2048 > using 4 cylinder groups of 79.91MB, 5114 blks, 10240 inodes. > super-block backups (for fsck -b #) at: > 32, 163680, 327328, 490976 > tty: not found > tty: not found > tty: not found > tty: not found > date: connect: Can't assign requested address Checking package > integrity... > Verified SHA1 checksum of jbase-ex-10.0R4.7.tgz Verified SHA1 checksum > of jboot-ex-10.0R4.7.tgz Verified SHA1 checksum of > jcrypto-ex-10.0R4.7.tgz Verified SHA1 checksum of > jdocs-ex-10.0R4.7.tgz Verified SHA1 checksum of > jkernel-ex-10.0R4.7.tgz Verified SHA1 checksum of > jpfe-ex42x-10.0R4.7.tgz Verified SHA1 checksum of > jroute-ex-10.0R4.7.tgz Verified SHA1 checksum of > jswitch-ex-10.0R4.7.tgz Verified SHA1 checksum of jweb-ex-10.0R4.7.tgz > Running requirements check first for jbundle-ex-4200-10.0R4.7-domestic... > Running pre-install for jbundle-ex-4200-10.0R4.7-domestic... > Installing jbundle-ex-4200-10.0R4.7-domestic in > /tmp/pa2398.26/jbundle-ex-4200-10.0R4.7-domestic.x2398... > Running post-install for jbundle-ex-4200-10.0R4.7-domestic... > Adding jkernel-ex... > Adding jcrypto-ex... > Adding jdocs-ex... > Adding jswitch-ex... > Adding jpfe-ex42x... > Adding jroute-ex... > Adding jweb-ex... > Saving home directories > *** The installer exited with status 2 *** > *** The installation is unsuccessful!!! *** A shell has been started. > type exit<cr> to reboot: > > > Is this a bad switch?? > > Thanks in advance, > > Paul > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp