Do you need policy? If not use the MX-80.
-----Original Message----- From: juniper-nsp-boun...@puck.nether.net [mailto:juniper-nsp-boun...@puck.nether.net] On Behalf Of Andrew Jones Sent: Monday, March 07, 2011 6:23 PM To: Juniper nsp Subject: [j-nsp] Router with lots of layer 3 interfaces Hi, I have a requirement to terminate the layer 3 for about 2000 vlans on a pair of routers of some kind, with failover in the event of one of the routers dying. Is this something that SRX240Hs could do? How many layer3 interfaces can the SRX240 handle? SRX650? Throughput is not a huge concern, each vlan only requires a small amount of bandwidth. To handle the failover, I could use the clustering, although that would mean any software upgrades would require a simultaneous reboot of both devices, making it a less desirable solution than having two SRXs with VRRP on each vlan-facing layer 3 interface which would allow me to reboot the boxes one at a time. My question with that setup is: how many VRRP instances can I have on an SRX? I appreciate any advice/feedback. Thanks, Andrew _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp