They're fine to run back to back.. Average launch power -8.2 through *0.5 dBm*
Average receive power -14.4 through *0.5 dBm* *Receiver saturation 0.5 dBm* You'll never launch hotter than the max RX.. They usually launch @ -2 -> -3dbm.. -- Tim On Thu, Mar 24, 2011 at 7:07 AM, Paul Stewart <p...@paulstewart.org> wrote: > Hi folks. > > > > These are "10KM" optics - how short of a run can you use them for? We have > several of these spared at the moment and I'd like to use them for > connections between MX480's in the same rack. will they run too hot? > > > > The specs on the Juniper site show: > > > > Transceiver model number XFP-10G-L-OC192-SR1 > > Optical interface Single-mode > > Transceiver type XFP > > Standard IEEE > 802.3ae-2002 > > Maximum distance 9/125 SMF cable: > 6.2 miles/10 km > > Transmitter wavelength 1260 through 1355 nm > > Average launch power -8.2 through 0.5 dBm > > Average receive power -14.4 through 0.5 > dBm > > Receiver saturation 0.5 dBm > > Receiver sensitivity -14.4 dBm > > > > > > Thanks, > > > > Paul > > > > > > > > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp