If the design is that bad - use virtual-links. Usually there are not any good reasons to do so. Area 0 must be the backbone, must be contiguous, and all other areas should connect to it.
________________________________________ From: medrees [medr...@isu.net.sa] Sent: Monday, September 12, 2011 4:19 AM To: juniper-nsp@puck.nether.net Subject: [j-nsp] How can change the OSPF backbone area number other 0? Dear Experts I'm confusing why all vendors chooses OSPF backbone area to be area 0 and I'm asking if there is method to change this number to any other to be configured in all routers within the network? Thanks, Best Regards, Mohamed Edrees _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp