Juniper devices have out of band ethernet ports, but have the HUGE HUGE downfall of being in the main routing table conflicting with every other route. This limits it usage, however a work around is to put the FXP interface into a logical system (on support devices). This has downfalls too, but its better than nothing. Unfortunately Juniper hasn't gotten this clue yes, every other vendor I've used recently has full vrf/logical system support for their OOB interfaces keeping them out of the main routing table.
One main downfall I'm running into is that I cannot copy or install software using the FXP port as my source for traffic. Does anyone know of a command that will allow me to select the logical system? The current commands don't seem to allow routing instances or logical systems to be specified. Something like: file copy logical-system:MGMT:ftp://blah/blah.. Anyone have any other workarounds. Thanks! _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp