Ok, I'm stumped. Configuring vpls and everything seems to be working but the local router interfaces. They come up as NP or hardware not present. The DPC and pic are up and working fine and I've tried it with "tunnel bandwidth 1g" configured under the chassis stanza as well as no tunnel services under vpls protocols. I have a pretty good grasp of vpls configuration, but I'm sensing a juniper nuance that I don't remember. Does this ring any bells for anyone?
Thanks, Keegan root@mx480> show vpls connections Layer-2 VPN connections: Legend for connection status (St) EI -- encapsulation invalid NC -- interface encapsulation not CCC/TCC/VPLS EM -- encapsulation mismatch WE -- interface and instance encaps not same VC-Dn -- Virtual circuit down NP -- interface hardware not present CM -- control-word mismatch -> -- only outbound connection is up CN -- circuit not provisioned <- -- only inbound connection is up OR -- out of range Up -- operational OL -- no outgoing label Dn -- down LD -- local site signaled down CF -- call admission control failure RD -- remote site signaled down SC -- local and remote site ID collision LN -- local site not designated LM -- local site ID not minimum designated RN -- remote site not designated RM -- remote site ID not minimum designated XX -- unknown connection status IL -- no incoming label MM -- MTU mismatch Legend for interface status Up -- operational Dn -- down Instance: vplsA Local site: mx480-vplsA (6) connection-site Type St Time last up # Up trans 5 rmt NP 9 rmt NP 10 rmt NP {master} root@mx480> _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp